Timbabuild EHB60 is a slow cure, high build, solvent free, epoxy resin designed to fill wood cavities up to 60mm deep. Perfect for wooden surfaces that have been damaged or where rot has occurred. The resin is easy to mix, fill, sculpt and shape once applied. Once cured, it is easily sanded and paint for a finish that is as good as new.

The dual cartridges extrude together at a 1:1 ratio to be mixed and used immediately.

VOC Classification A (ultra low VOC)

Features

• Completely solvent free, low odour formula.
• Perfect for use inside and out
• cured, ready for paint in four hours at 20-35 degrees
• non shrinking and is effective as an adhesive
• Incredibly strong and doesn’t crack
• Commonly used to fill rotten window frames and sills once rotten wood removed and EWS hardener Primer applied and set.
• Easy to use and clean up with extrusion tool and pvc mixing board.
• Long shelf life at 24 months from Manufacture date.

Application

1. Route out rotten timber with a router or chisel
2. Apply EWS hardener (wood hardener primer)
3. Extrude onto board - best to leave first 5cm to waste to ensure best results if second application using previously used tubes
4. Apply, shape and smooth with a putty knife
5. Sand to finish with P120. The ultimate combination is the Mirka DEOS Sander and Abranet 81 x 133mm. Hand sanding is also affective but not as fast.
6. Prime, and paint

MPN: 65863